for your Active Enjoyment
Here you see the settings page where you can change the core values:
First Shift start time.
Valid Values = 01:00 to 08:00
Length in hours of each shift (default = 4)
Selectable Range = 1 to 6
No of shifts (default=3)
Selectable Range = 1 to 4
Ships Time offset to GMT/UTC (default=1)
Selectable Range = -12 to +12
You change values by pressing the up and down arrows.
There is also 6 buttons on this page that let you select different sounds for your “chiming”: 2 different ships bells, soft bells, car horn, squeaks and barks.
Select them by pressing. The one that show in green is the one selected.
don't forget to save after making changes. Sounds and Chimer(Sound) On/Off sticks without saving.
This page has 4 buttons at the bottom:
“Exit” brings you back to the Main Page
“Manual” brings you to this webpage of the manual.
“Save” will apply all the selected values to the current running service, and then bring you back to the Main Page.
“Chimer On” will change to “Chimer Off” if pressed, and will stop the ringing of the halve and full hourly bells.
You can also set it to chime only on your shift by choosing “Shift 1”, “Shift 2”, “Shift 3” or “Shift 4”
It will then give a 15 minute warning before your shift starts, give the full end bell of the last shift, chime and chime the rest of your shift as normal. Then sleep until your next shift.
“Cancel” will bring you back to the Main Page without saving the selected pattern values.